sub2

ONLINE INQUIRY

*Note: Please be sure to fill in the information accurately, and keep the communication unblocked, we will get in touch with you as soon as possible

SUBMIT
EN8/EN9 En Series Carbon Steel Bar

EN8/EN9 En Series Carbon Steel Bar

En-8 (1040) It is an unalloyed medium carbon steel with reasonable tensile strength. It is usually supplied in a cold drawn or rolled state. Tensile properties may vary, but are usually between 500 - 800 N/mm. It is widely used in applications that require better performance than mild steel but cannot justify the cost of alloy steel. EN8 can be flame or induction hardened to produce good surface hardness and moderate wear resistance.

VIEW DETAILS + INQUIRY DISCOUNT
API Spec 5L Steel Pipe

API Spec 5L Steel Pipe

API Spec 5L is an international standard that specifies the manufacturing requirements for two product specification grades (PSL 1 and PSL 2) of seamless and welded steel pipes used in pipeline transportation systems in the oil and gas industry.

VIEW DETAILS + INQUIRY DISCOUNT
A572/S355JR Carbon Steel Plate

A572/S355JR Carbon Steel Plate

A572 grades are divided into: 42, 50, 60, 65. The steel plate is light in weight, but has good strength, ductility and workability, making it an ideal choice for structural applications. These characteristics make the A572 relatively simple to shape into different structures, while maintaining the ability to withstand large stresses and loads.

VIEW DETAILS + INQUIRY DISCOUNT
API 5CT Steel Pipe

API 5CT Steel Pipe

API is an acronym for the American Petroleum Institute and is considered the most authoritative and comprehensive principle in the oil and gas industry. API 5B and API 5CT are mainly used for oil casing. API 5CT oil casing can be divided into seamless steel pipe and welded steel pipe, welded steel pipe mainly refers to the straight seam steel pipe, large diameter oil casing is generally submerged arc welding straight seam steel pipe.

VIEW DETAILS + INQUIRY DISCOUNT
A192 Seamless Carbon Steel Pipe

A192 Seamless Carbon Steel Pipe

ASTM A192 is the same as ASME SA-192 and is the standard specification covering seamless carbon steel boiler and superheater tubes of minimum wall thickness for high pressure service.

VIEW DETAILS + INQUIRY DISCOUNT
A514 Carbon Steel Coil

A514 Carbon Steel Coil

ASTM A514 steel is available in several grades: A, B, C, E, F, H, J, K, M, P, Q, S, and T, all of which have the same mechanical properties. ASTM A514 steel plates are conventionally quenched and tempered steel. ASTM A514 steel coil is known for its high yield strength, weldability and toughness, even at low temperatures. ASTM A514 steel is a special high-strength steel, mainly used as building structural steel.

VIEW DETAILS + INQUIRY DISCOUNT
A573/A573M Carbon Steel Coil

A573/A573M Carbon Steel Coil

ASTM A573/A573M grades are divided into 58, 65 and 70. Steel coils are suitable for structural carbon-manganese-silicon steel plates with three tensile strength ranges. ASTM A573/A573M steel coils are mainly used for important purposes of improving notch toughness at room temperature.

VIEW DETAILS + INQUIRY DISCOUNT
A588 Carbon Steel Coil

A588 Carbon Steel Coil

ASTM A588 steel includes Class A, Class B, Class C, and Class K. The ASTM A588 steel specification is based on the standard specification for high-strength low-alloy structural steel with a lower yield point of up to 50ksi for applications requiring high strength and corrosion resistance.

VIEW DETAILS + INQUIRY DISCOUNT
A283/Q195 Carbon Steel Plate

A283/Q195 Carbon Steel Plate

ASTM A283 is a carbon steel plate used for general structural purposes. The steel has low and medium tensile strength. The ASTM A283 steel specification covers four structural quality grades of mild steel, grades A, B, C, and D, for general application.

VIEW DETAILS + INQUIRY DISCOUNT
A514 Carbon Steel Plate

A514 Carbon Steel Plate

ASTM A514 steel is available in several grades: A, B, C, E, F, H, J, K, M, P, Q, S, and T, all of which have the same mechanical properties. ASTM A514 steel plates are conventionally quenched and tempered steel. ASTM A514 steel plate is known for its high yield strength, weldability and toughness, even under low temperature conditions. ASTM A514 steel is a special high-strength steel, mainly used as building structural steel.

VIEW DETAILS + INQUIRY DISCOUNT
A573/A573M Carbon Steel Plate

A573/A573M Carbon Steel Plate

ASTM A573/A573M grades are divided into 58, 65 and 70. Steel plates are suitable for structural carbon-manganese-silicon steel plates with three tensile strength ranges. ASTM A573/A573M steel plates are mainly used for important purposes of improving notch toughness at room temperature.

VIEW DETAILS + INQUIRY DISCOUNT
GB/T700 GB/T1591 Carbon Steel Plate

GB/T700 GB/T1591 Carbon Steel Plate

The equivalent material of GB/T700 Q275 carbon steel and low alloy steel plate is S275JR steel plate. S275JR steel plate is a general-purpose carbon structural steel. This steel is similar to the steels listed in China GB/T700 and GB/T1591. It is also a carbon structural steel and low alloy structural steel used in engineering steel and structural steel, which is usually not heat treated. GB/T1591 steel plate is a Chinese standardized low alloy medium tensile strength steel plate produced by hot rolling process. GB/T1591 steel plate has a variety of manufacturing purposes.

VIEW DETAILS + INQUIRY DISCOUNT
< 1234...8 >
Kungang Steel
Address Sangzidian Town, Tianchi District, Tianan City, Shandong Province
Kungang Steel
Telephone +8618006410733
Kungang Steel
Email sales09@kgjtsteel.com

LEAVE MESSAGE

*Note: Please be sure to fill in the information accurately, and keep the communication unblocked, we will get in touch with you as soon as possible

Submit a message

Copyright ©Kungang Steel (Shandong) Group Co., Ltd.  POWERED BY 300.CN  |  SEO | PRIVACY POLICY  【 Business license】